| Now offering free shipping to all Canadian customers. This offer is for website purchases only. Free shipping via Canada Post. |
GM 12 BOLT TRUCK
| 69-81 Blazer 64-81 C & K 10 Pickups 65-81 C & K 10 Suburban 65-81 G10/G20 Vans Cover bolts: 12 Ring gear diameter: 8.875” Carrier Breaks: 2.54-2.73 / 2.76-3.42 / 3.73-up Pinion shaft diameter/splines: 1.438/10 (63-64), 1.438/30 Axle shaft diameter/splines: 1.28/17 (63-64), 1.28/30 Available ratios: 2.54, 2.73, 2.76, 3.07, 3.08, 3.42, 3.73, 3.90, 4.10, 4.56, 4.88, 5.13, 5.38 | ||||
| Part Name | Part Category | Condition | Price | |
| Coming Soon | Pinion Yokes | New | $0.00 | |
| Coming Soon Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| GM 12 Bolt Truck Bearing Kit | Bearing Kits | New | $175.00 | |
| This kit includes OEM Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete master shim kit, ring gear bolts, pinion nut, crush sleave, thread locking compound, marking compound with brush. These Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| ARB Air Locker GM 12 Bolt Truck 3.73-up Ratios | ARB Air Lockers And Compressors | New | $1050.00 | |
| The ARB Air Locker is a unique air operated unit, for which the locking action is controlled by the driver with a push of a button inside the cab. A 12-volt air compressor engages the unit in approximately 1 second and can be engaged at any vehicle speed. 100% drive Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| Eaton Posi-Trac 12 Bolt Truck 3.73-up Ratios | Posi-tracs / Limited Slips | New | $650.00 | |
| Eaton is your traction control solution. With an Eaton you get bullet proof performance, Advanced clutch technology, high impact precision-forged gears, race-bred carbon fiber friction discs, high strength nodular iron case and a 1 year manufactures warranty. This unit is rebuildable. This eaton posi fits a GM 12 bolt truck Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| Eaton Posi-Trac 12 Bolt Truck 2.76-3.42 Ratios | Posi-tracs / Limited Slips | New | $725.00 | |
|
| Eaton is your traction control solution. With an Eaton you get bullet proof performance, Advanced clutch technology, high impact precision-forged gears, race-bred carbon fiber friction discs, high strength nodular iron case and a 1 year manufactures warranty. This unit is rebuildable. This eaton posi fits a GM 12 bolt truck Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| Detroit Locker GM 12 Bolt Truck 30 Spline 3.73-up Ratios | Lockers | New | $950.00 | |
| The Detroit Locker maximizes traction by delivering 100% of the torque to both drive wheels. It is engineered to keep both wheels in a constant drive mode, and has the ability to automatically allow wheel speed differention when required. Applications are also available for C-Clip style axles. No other performance Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| Detroit Truetrac GM 12 Bolt Truck 30 spline 3.73-up Ratios | Posi-tracs / Limited Slips | New | $695.00 | |
| Eaton's Detroit Truetrac was the first heilcal gear differential ever introduced into the automotive aftermarket. It remains the leading helical gear-type limited slip differential in the industry. Its helical gear design eliminates the need for wearable parts, resulting in maintenance free traction. Recongnized not only for its durability but also Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| USA Standard GM 12 Bolt Truck Ring and Pinion 3.08:1 Ratio | Ring and Pinions | New | $275.00 | |
| This USA Standard gear is for a GM 12 Bolt Truck rear differential 3.08:1 ratio. USA Standard gear offers a lower cost alternative to other manufacturers when price must be kept low. Some slight noise may be detected under light load. This is considered normal, and is no way detrimental Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| USA Standard GM 12 Bolt Truck Ring and Pinion 3.42:1 Ratio | Ring and Pinions | New | $250.00 | |
|
| This USA Standard gear is for a GM 12 Bolt Truck rear differential 3.42:1 ratio. USA Standard gear offers a lower cost alternative to other manufacturers when price must be kept low. Some slight noise may be detected under light load. This is considered normal, and is no way detrimental Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| USA Standard GM 12 Bolt Truck Ring and Pinion 3.73:1 Ratio | Ring and Pinions | New | $250.00 | |
|
| This USA Standard gear is for a GM 12 Bolt Truck rear differential 3.73:1 ratio. USA Standard gear offers a lower cost alternative to other manufacturers when price must be kept low. Some slight noise may be detected under light load. This is considered normal, and is no way detrimental Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| USA Standard GM 12 Bolt Truck Ring and Pinion 3.73:1 Ratio THICK | Ring and Pinions | New | $250.00 | |
|
| This USA Standard gear is for a GM 12 Bolt Truck rear differential 3.73:1 ratio THICK GEAR for a 3.42-down carrier. USA Standard gear offers a lower cost alternative to other manufacturers when price must be kept low. Some slight noise may be detected under light load. This is considered Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| USA Standard GM 12 Bolt Truck Ring and Pinion 4.11:1 Ratio | Ring and Pinions | New | $250.00 | |
|
| This USA Standard gear is for a GM 12 Bolt Truck rear differential 4.11:1 ratio. USA Standard gear offers a lower cost alternative to other manufacturers when price must be kept low. Some slight noise may be detected under light load. This is considered normal, and is no way detrimental Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| USA Standard GM 12 Bolt Truck Ring and Pinion 4.11:1 Ratio THICK | Ring and Pinions | New | $250.00 | |
|
| This USA Standard gear is for a GM 12 Bolt Truck rear differential 4.11:1 ratio THICK GEAR this will fit on a 342-down carrier. USA Standard gear offers a lower cost alternative to other manufacturers when price must be kept low. Some slight noise may be detected under light load. Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| USA Standard GM 12 Bolt Truck Ring and Pinion 4.56:1 Ratio | Ring and Pinions | New | $250.00 | |
|
| This USA Standard gear is for a GM 12 Bolt Truck rear differential 4.56:1 ratio. USA Standard gear offers a lower cost alternative to other manufacturers when price must be kept low. Some slight noise may be detected under light load. This is considered normal, and is no way detrimental Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| USA Standard GM 12 Bolt Truck Ring and Pinion 4.56:1 Ratio THICK | Ring and Pinions | New | $250.00 | |
|
| This USA Standard gear is for a GM 12 Bolt Truck rear differential 4.56:1 ratio THICK GEAR this will work on a 342-down carrier. USA Standard gear offers a lower cost alternative to other manufacturers when price must be kept low. Some slight noise may be detected under light load. Read More ... | |||
| Part Name | Part Category | Condition | Price | |
| USA Standard GM 12 Bolt Truck Ring and Pinion 4.88:1 Ratio | Ring and Pinions | New | $265.00 | |
|
| This USA Standard gear is for a GM 12 Bolt Truck rear differential 4.88:1 ratio. USA Standard gear offers a lower cost alternative to other manufacturers when price must be kept low. Some slight noise may be detected under light load. This is considered normal, and is no way detrimental Read More ... | |||
Differentials
- AAM 10.5 REAR
- AAM 11.5 REAR
- AAM 9.25 FRONT
- AMC-20 REAR
- CHRYLSER 7.25 IFS, CHRYSLER 7.25 REAR
- CHRYSLER 7.9/8.0 IFS
- CHRYSLER 8.25/8.375 REAR
- CHRYSLER 8.75
- CHRYSLER 9.25 REAR
- CHRYSLER 9.63” DROPOUT
- DANA 28 FRONT
- DANA 30 FRONT
- DANA 30 REAR
- DANA 35 / AMC-15 REAR
- DANA 35TTB / 35IFS FRONT
- DANA 36 ICA REAR
- DANA 44 FRONT, BEAM & TTB
- DANA 44 ICA REAR
- DANA 44 REAR
- DANA 50 BEAM & TTB FRONT
- DANA 60 FRONT
- DANA 60 REAR
- DANA 61 REAR
- DANA 70 FRONT
- DANA 70 REAR
- DANA 80 REAR
- FORD 10.25 REAR
- FORD 10.5 REAR
- FORD 7.5 REAR
- FORD 8" REAR
- FORD 8.8 Solid axle & Independent
- FORD 9" REAR
- FORD 9.38" REAR
- FORD 9.75 REAR
- GM 10.5 REAR
- GM 12 BOLT CAR
- GM 12 BOLT TRUCK
- GM 7.25 FRONT IFS
- GM 7.5 REAR
- GM 7.625 REAR
- GM 8.0 REAR
- GM 8.2 Cast Iron Corvette IRS
- GM 8.2 REAR
- GM 8.25 FRONT IFS
- GM 8.4 REAR DROPOUT 55-64 CHEV
- GM 8.5 FRONT
- GM 8.5 REAR
- GM 8.6 REAR
- GM 9.25 FRONT IFS
- GM 9.375 REAR DROPOUT
- GM 9.5 REAR
- TOYOTA 7.5 IFS
- TOYOTA 8.0 DROPOUT
- TOYOTA 8.25 DROPOUT
- TOYOTA 9.5 DROPOUT FRONT AND REAR